40 years MRU

SWG 100 Syngas Stationary Analyzer for Syngas - Measurements

CO CO2 CH4 O2 H2S H2

The complete, ready to use  analyzer SWG100 Syngas  
is the industrial solution for:

  • biomass, coal and waste  gasification plants
  • cogeneration heat and power engines (CHP) using syngas
  • small scale syngas analysis for research institutes and lab

MRU analyzer, series SWG100 Syngas is designed for use
in industrial safe areas or inside laboratories as well.
The analyzer can be installed in outdoor or indoor location,
can sample dry or wet syngas, pressurized or low pressure
gas and can be used from multiple sampling points.

Sample gas washing device
Gas sampling probe
Basic-Equipment
  • IP 54 stainless steel cabinet, with monitored, continuous venting
  • accurate measurements, using infrared, electrochemical and thermal conductivity technology
  • sampling from low suction -100mbar up to high pressure +200mbar of gas pipe
  • no dilution of sample gas is required
  • integrated gas cooler with condensate draining pump
  • direct and continuous measurement, with pressure and temperature compensation
  • multiple sampling point monitoring  (up to 8 sites monitoring) with one analyzer
  • flow restrictor orifice gas inlet for high pressure site
  • with sample gas cut-off and power supply shut-off in case of alarm
  • industry compatible rugged design , easy and fastest service design
Options
  • NDIR bench for CO - CO2 - CH4 analysis, (using selective CH4 measurement)
  • O2 long life electrochemical or paramagnetic cell measurement
  • H2S electrochemical cell measurement, H2 immune
  • H2 thermal conductivity detector measurement with cross interference correction
  • Multiple sampling point switching and monitoring (time sharing)
  • RS485 to USB or Profibus or Ethernet converter
  • I/O Module with 4chanel 4-20mA analog output and 2 alarm relays
  • Sample gas washing device, for cleaning sample gas of tar
  • Gas sampling probe model HD-GW, for syngas with tar or acid mist
  • Different lengths of heated and temperature regulated sampling lines
Technical Data
Measuring range
CO 0 ... 100% (NDIR)
CO2 0 ... 100% (NDIR)
CH4 0 ... 100% (NDIR)
O2 0 ... 25% (EC)
O2 0 ... 25% (paramagnetic)
H2S 0 ... 2.000/5.000 ppm (EC)
H2 0 ... 1,00%/50% TCD
Ambient air temperature +5°C…+45°C
Calculated values
Calorific value 0 ... 50MJ/m³ or MJ/kg
Dimensions and other data
Weight 45 kg
Power supply Universal 90-240 Vac / 47-63 Hz / 200W
Dimensions 700 x 600 x 210 mm (H x W x D) for wall or rack mounting
Gas conditioning Electric gas cooler (Peltier) with constant dew point +5° C
Interfaces 4 x analog output 4-20 mA, floating, max. load 500R 4 x analog input 4-20 mA, passive inputs RS485 digital interface (Modbus RTU)
Protection Sample gas shut-down solenoid valve Power supply cut-off in case of system alarm
Downloads

Contact

MRU Messgeräte für Rauchgase
und Umweltschutz GmbH
Fuchshalde 8 + 12
74172 Neckarsulm

 

Phone +49 7132 9962 0
Fax +49 7132 9552 20
info@mru.de
www.mru.eu

 

Download App

MRU4u
MRU4u

Service

Social