Hydrogen measurement
The MRU H2-Analysers
A suitable device for every application
SWG 100 BIOcompact Stationary biogas measuring system for discontinuous measurements
Cost effective stationary biogas analyser designed for:
- Discontinuous measurement, user settable up to 24 measurements per 24 hours
- Use in the harsh industrial environment of combined heat and power (CHP) engine gas monitoring
- Accurate measurements, incl. plug & play pre-calibrated sensors
- Up to 2 sites monitoring (times sharing technique)
The analyser samples dry biogas, pressurized or low pressure gas and can be used for single or dual point sampling of:
- Cogeneration heat and power engines (CHP)
- Municipal or industrial waste water treatement sites
- Small scale AD plants with dry fermentation
- Landfill sites
Basic-Equipment
- Plug & play, pre-calibrated sensors
- Safety in use with gas flow restrictor orifice at gas inlet and ventilation
- Efficient sample gas preparation for fast and reliable measurements
- Sampling from low suction up to high pressure gas
- No dilution of the sample gas, neither use of compressed air is required
- Discontinuous measurement, user settable up to 24 measurements per 24 hours
- Up to 2 sites monitoring (time sharing technique) with only one analyzer
- Data storage and event logging on SD card
- IP 54 cabinet for use in harsh environment
- Ready to run delivery, minimum installation work, low service downtime
- May be installed outside or inside
Technical Data
Measuring range
| CH4 | 0 ... 100% (infrared NDIR) |
| CO2 | 0 ... 100% (infrared NDIR) |
| O2 | 0 ... 25 % (electrochemical) |
| H2S low | 0...50/ overload 250ppm |
| H2S high | 0...5.000/ overload 10.000ppm |
| H2 | 0...1.000/ overload 2.000ppm |
Calculated values
| Calorific value | 0 ... 50 MJ/m3; MJ/kg |
Dimensions and other data
| Operating temperature | +5 ... 45°C or -10 ... 45°C with cabinet heater |
| Power supply | Universal 90 ... 240 Vac / 47 ... 63 Hz / 60W (360 W with cabinet heater) |
| Protection | IP 54 |
| Dimensions | 400x500x300 mm (WxHxD) wall or rack mounting |
| Display | 3,5" TFT colour display with backlight |
| Weight | 14 kg |
Downloads
Questionnaire Biogas
PDF, 225 KB
Flyer SWG 100 BIOcompact
PDF, 1 MB
EN_Brochure_Overview_BIOGAS.pdf
PDF, 1 MB
MGAprimeQ - Portable Automatic Measuring System (PAMS) suitable as an alternative method for the standardreference method
for calibrating and validating stationary AMS in the context of QAL2 and AST in accordancewith EN 14181
VARIOluxx - Our new portable stack gas emission analyser for long time measurements of industrial combustions
Suitable for precise low NOx measurements and other toxic gas emissions measurements according
to new MCP Directive 2015/2193
New stationary biogas analyser: SWG 100 BIOcompact
Cost effective stationary biogas analyser for discontinuous measurements
MRU-Measuring units now available for Biogas - Applications
Handheld, compact case or stationary - MRU offers Biogas measuring and monitoring systems for a wide variety of needs.
