SWG 100 Syngas Stationary Analyzer for Syngas - Measurements

COCO2CH4O2H2SH2

The complete, ready to use  analyzer SWG100 Syngas  
is the industrial solution for:

  • biomass, coal and waste  gasification plants
  • cogeneration heat and power engines (CHP) using syngas
  • small scale syngas analysis for research institutes and lab

MRU analyzer, series SWG100 Syngas is designed for use
in industrial safe areas or inside laboratories as well.
The analyzer can be installed in outdoor or indoor location,
can sample dry or wet syngas, pressurized or low pressure
gas and can be used from single or double sampling points.

Basic-Equipment
  • IP 65 stainless steel cabinet, also for use in outdoor condition with sun and rain cover
  • accurate measurements, using infrared and thermal conductivity technology
  • sampling from low suction -100mbar up to high pressure +200mbar of gas pipe
  • no dilution of sample gas is required
  • integrated gas cooler with condensate draining pump
  • direct and continuous measurement, with pressure and temperature compensation
  • multiple sampling point monitoring  (up to 2 sites monitoring) with one analyzer
  • flow restrictor orifice gas inlet for high pressure site
  • with sample gas cut-off and power supply shut-off in case of alarm
  • industry compatible rugged design , easy and fastest service design
     
Options
  • NDIR bench for CO - CO2 - CH4 analysis, (using selective CH4 measurement)
  • O2 long life electrochemical or paramagnetic cell measurement
  • H2S electrochemical cell measurement, H2 immune
  • H2 thermal conductivity detector measurement with cross interference correction
  • Two sample point switching and monitoring (time sharing)
  • RS485 to USB or Profibus or Ethernet converter
  • I/O Module with 4chanel 4-20mA analog output and 2 alarm relays
  • Cabinet 200W heater 115/230Vac, temperature regulated
  • Sample gas washing device, for cleaning sample gas of tar
  • Gas sampling probe model HD-GW, for syngas with tar or acid mist
  • Different lengths of heated and temperature regulated sampling lines
Technical Data
Measuring range
CO 0 ... 100% (NDIR)
CO2 0 ... 100% (NDIR)
CH4 0 ... 100% (NDIR)
O2 0 ... 25% (EC)
O2 0 ... 25% (paramagnetic)
H2S 0 ... 2.000/5.000 ppm (EC)
H2 0 ... 10%/100% TCD
Ambient air temperature +5°C…+45°C or -20°C…+45°C with cabinet heater
Calculated values
Calorific value 0 ... 50MJ/m³ or MJ/kg
Dimensions and other data
Weight 45 kg
Power supply Universal 90-240 Vac / 47-63 Hz / 60W, 260W with heater
Dimensions 700 x 600 x 210 mm (H x W x D) for wall or rack mounting
Gas conditioning Electric gas cooler (Peltier) with constant dew point +5° C
Interfaces 4 x analog output 4-20 mA, floating, max. load 500R4 x analog input 4-20 mA, passive inputs RS485 digital interface (Modbus RTU)
Protection Sample gas shut-down solenoid valvePower supply cut-off in case of system alarm
Downloads